HPT SERIES
The “HPT” Series tandem cylinder is a totally self-contained, cost-effective power source ideally suited for a wide variety of assembly and forming applications. Available in sizes from 1 to 10 tons, up to 8.00″ stroke, and 1.00″ power stroke, the HPT Series cylinder line provides a compact package where space is limited.
- Single Component System
- LT and LTI Compatible
- More Options Than HPI Series
- Shorter Than HPI Series
- Special Strokes Available
- Special Rod Ends Available
- AVAILABILITY: 4-6 WEEKS STANDARD, EXPEDITE AVAILABLE
(CALL FOR SPECIFIC AVAILABILITY) - MODEL: HPT-XX-X.XX-X.XX-FH-XXXX
- Total air/oil separation
- Linear force output
- Three moving components
- Simple control circuits
- 100,000 PSI tensile tie rods
- NFPA medium duty mounting styles
- Operation in any position or attitude
- 4.7 million MTBF, 20 million service life
- Field serviceable-seal kits
- Fill units/repair manual
- Heavy-duty construction designed for years of trouble free use
- Numerous options, such as gage kits, sensors, press frames and bases.
- 3 year warranty
| Spec Sheet: | HPT Spec Sheet |
|---|---|
| Functional Description: | HPT Functional Description |
| Fill and Vent Procedures: | Using HFP-1 Fill Unit Using HFP-2 Fill Unit |
| Cylinder Component and Seal Callout: | Cylinder Seal Replacement Instructions |
| Approved Pneumatic Schematics: | 2-Pos Spring Return 2-Pos Spring Return ELT 2-Pos Spring Return with PT Sensor 2-Pos Spring Return with 2 Hand No Tie Down 3-Pos Open Center 3-Pos Open Center with Rod Lock |
| Troubleshooting: | Various Problem Solutions Serial Number Location |
Please contact our sales team at 734-529-8855 for more information.
Please contact our sales team at 734-529-8855 for more information.
RELATED OPTIONS
(LTI) EXTERNAL LINEAR TRANSDUCER
Low Voltage Linear Transducers –VIEW
Magnetostrictive technology with Auto Tuning, non-contact, wear free, Analog, Digital, SSI, Pulse, CANopen, Profibus and Quadrature output, .0001″ resolution capable, 7-pin connector/cable. NOTE: Non-Rotate option required for addition of LTI.
-Resolution: 0.66A
-Non-linearity: +/- 0.02% over full scale
-Repeat-ability Resolution: min 2m
-Sampling Rate 2KHz
-Operating Voltage 24Vdc or 15Vdc
(LT) INTERNAL LINEAR TRANSDUCER
Integrally Mounted Low Voltage Linear Transducers –VIEW Magnetostrictive technology with Auto Tuning, non-contact, wear free, Analog, Digital, .0001″ resolution capable, 7-pin connector/cable.
-Resolution: 0.66A
-Non-linearity: +/- 0.02% over full scale
-Repeat-ability Resolution: min 2m
-Sampling Rate 2KHz
-Operating Voltage 24Vdc or 15Vdc
(LC) LOAD CELL
Strain bridge design load cell. Load cell O.D. matches drive unit ram O.D. for a compact, integrated design. Mini Brad-Harrison style four 4-pin connector. Signal conditioner is required.
-Rated Output: 2mV/ V
-Combined Error: 0.25% of full scale
-Non-repeatability: 0.05%
-Zero Balance: 1%
-Excitation Voltage: 10VDC
-Maximum Load: 200% of full -scale (ultimate) / 150% of full scale (safe)
(BSPP) PNEUMATIC PORTING
Pneumatic porting available to order in BSPP porting. All pneumatic ports (4).
Porting of “NPT” is standard.
(AL) MECHANICAL ROD LOCK
The “AL” Rod Lock option is a locking device installed on the head end of the cylinder that provides a positive locking of the cylinder rod when air is removed from the lock. The locking action is designed where safety considerations require positive locking of the tooling/actuator when air pressure is removed from the circuit. The rod lock option is available for all 1 through 30 ton HyperCyl® cylinders. Rod Lock – 60 PSI minimum air pressure required.
(TSL) TOTAL STROKE LIMITER
The “TSL” option limits the total stroke of the cylinder, including the power stroke. Adjustment is accomplished by rotating the adjustment barrel and locking ring.
(NR) NON-ROTATE
Utilizing the flats on the external work rod, the Non-Rotate option provides a mechanical non-rotate rod/adapter plate for Anti-rotate.
Included: NR plate, NR rod, NR/FH head and fasteners.
(S) NON-STANDARD ROD END
The cylinder rod end can be modified to adapt to customer tooling, die plates and/or just about anything else that is required. Please make your request known during the quoting process.
Standard– Female, imperial thread.
SPECIAL MOUNTING
Please contact our sales team at 734-529-8855 for more information.
ACCESSORIES
(SWD) HEAVY DUTY DIGITAL PRESSURE SWITCH
(SW) HEAVY DUTY ANALOG PRESSURE SWITCH
(G-01) HYDRAULIC GAGE KITS
(PHA-XX) HIGH PRESSURE HOSE ASSEMBLIES
(PB) PRESSURE BLOCK
(IC-1) PRESSURE COUPLING
(GA-1) GAGE ADAPTER COUPLING
(HFP-1) PNEUMATIC FILL UNIT
(HFP-2) MANUAL FILL UNIT
(PT)(ELT) SENSORS
(SIG) HYPERVIEW PRESS MONITORING SYSTEM
(PAF-XX) DIE SET MIS-ALIGNMENT COUPLINGS
(PAQ-XX) QUICK CHANGE DIE SET MIS-ALIGNMENT COUPLINGS
(NGT) PILOT OPERATED CHECK VALVE
(FC) PNEUMATIC FLOW CONTROL