(SWD) Heavy duty digital pressure switch

SWD series digital pressure switches provide a four-digit display in the programming of the switch points and an accurate readout of cylinder pressure and set points. SWD series switches also provide a 4-20ma output signal which may be used for data collection, remote display or alarm functions. Read more…

SWD (0-3626 PSI, 20-30 VDC, PNP or NPN Output

  • Repeatability ±.3% of range
  • Switching frequency is adjustable
  • Switch point accuracy of ±1% of full range
  • Electrical connection: 4-Pin Micro DC

 

(SW) Heavy Duty Analog Pressure Switch

SW series switches provide a dry contact, manually adjusted set point way to monitor the internal hydraulic pressure of all HyperCyl® cylinders during the power stroke. Once pressure has been achieved (confirming cylinder force) contact closure output can be utilized to retract the cylinder.

SW-01 (suitable for all series cylinders except 100 ton)

  • Adjustable range from 150-2300 PSI
  • Repeatability of 3%
  • Maximum switching rate of 100 CPM
  • Electrical protection NEMA 4
  • Electrical rating AC/DC 5A
  • Electrical connection: 3-Pin (DIN) connector, included

(G-01) Hydraulic gage kits

Hydraulic gage kits allow monitoring of the internal hydraulic oil pressure. Kits include a gage, GA-1 coupling and T-fitting.

All cylinder series:                          G-01 (0-3000 PSI liquid filled)

(PHA-xx) High Pressure Hose Assemblies

PHA hose assemblies connect the cylinder to a PB Pressure Block. Available in various lengths.

Working pressure:    0-6000 PSI

PHA-12”                PHA-24”

PHA-36”               PHA-48”

PHA-60”              PHA-72”

(PB) Pressure Block

The “PB” Pressure Block can be used to remotely monitor/control the hydraulic oil pressure of all HyperCyl® cylinders.

Includes gage. IC-1 coupling must be ordered separately

(IC-1) Pressure Coupling

Standard on all cylinders, the IC-1 coupling is required to connect a “PHA” hose assembly to the “PB” pressure block.

(GA-1) Gage Adapter Coupling

The GA-1 adapter coupling is required when installing a customer supplied hydraulic gage (1/4” NPT).

(HFP-1) Pneumatic Fill Unit

HyperFill refilling units are self-contained devices used to replenish oil in the reservoir section of all HyperCyl® cylinders.

The HFP-1 includes the fill unit, fill coupling, 3’ hose assembly, pneumatic gage, palm button and complete instructions. Refilling is a simple 3-step process.

(HFP-2) Manual Fill Unit

HyperFill refilling units are self-contained devices used to replenish oil in the reservoir section of all HyperCyl® cylinders.

The HFP-2 unit is manually operated.

(PT)(ELT) Sensors

PT/ELT series sensors provide a pneumatic (PT) or electrical (ELT) output signal when the cylinder work rod and tooling have contacted the work surface. Typically used to sequence HyperCyl® cylinders into high pressure. Sensor installs into the “B1” port.

 

(SIG) Hyperview Press Monitoring System

HyperView-Press® Monitoring System provides the easiest to use, most comprehensive and highest reliability press monitoring available. With the most consistent test results and less false failures, the HyperView-Press® will help you achieve your yield and quality objectives.

Available for single, dual and quad ram analysis.Read More…

(PAF-xx) Die Set Mis-alignment Couplings

The PAF Series alignment coupling is a flexible connection for use with all HyperCyl® cylinders and conventional die sets. The coupling provides an axial float between the cylinder and customer supplied die set, minimizing side loading of the cylinder rod, extending cylinder life. Alloy steel (Rockwell “C” 58/60) construction with black oxide finish. All coupling sets include 1 cylinder coupling, 1 PAF die flange,  1 hardened steel back up plate and socket head cap screws.Read more…

(PAQ-xx) Quick Change Die Set Mis-alignment Couplings

The PAQ Series alignment coupling is a flexible, Quick-change connection for use with all HyperCyl® cylinders and conventional die sets. The coupling provides an axial float between the cylinder and customer supplied die set, minimizing side loading of the cylinder rod, extending cylinder life. Alloy steel (Rockwell “C” 58/60) construction with black oxide finish. All coupling sets include 1 cylinder coupling, 1 PAQ die flange,  1 hardened steel back up plate and socket head cap screws.Read more…

Available in all cylinder sizes with female thread, male thread and Non-Rotate options

(NGT) Pilot Operated Check Valve

Lock your pneumatic device in position when a pressure drop or total loss of pressure occurs. Manual release for exhausting trapped air before maintaining the system (OSHA Requirement).

  • -Immediate Checking
  • -Optional Manual Release
  • -.0000522 cc/min Leak Rate
  • -Low & High Temp