At HyperCyl, we specialize in the manufacture of hydra-pneumatic cylinders and presses for assembly and forming applications. By utilizing our cylinders, our customers benefit from the following:
Because a HyperCyl cylinder’s approach stroke and high-pressure stroke are independently controlled, separate regulation for the approach stroke and the high-pressure stroke is as easy as using a sandwich regulator on the high-pressure valve, or an in-line regulator.
The initial stroke to close the tool is only under air pressure (without intensification), and therefore, low force. Your tooling will last longer.
Our cylinders do not use mechanical springs to move the pistons, which can break and hinder/halt operations. There are no unexpected motions from stored energy in HyperCyl cylinders.
Our cylinders consume less air than other pneumatic cylinders. Our cylinders take up less space, generate less heat and noise, and cost less to purchase than a hydraulic cylinder and power unit.
“HyperCyl hydra-pneumatic cylinders provide us with...A high force cylinder without having to take up space with hydraulic power units. This allows us to have more actuators in a given area, and thus do more on our floor than we could with hydraulics”Bill H.
“Our HyperCyl C-frame press has performed flawlessly for over 3 years and 300,000+ cycles. The press embosses 12 gauge steel for a high volume automotive application. We highly recommend HyperCyl for reliable press solutions.”
“Aries Engineering/HyperCyl provides us with..a full range of options available to support customer quality control requirements such as force and distance monitoring.”
“HyperCyl Hydra-Pneumatic cylinders provide us with a high force cylinder without the noise and mess of hydraulics.”
we now offer (16) standard cylinders per tonnage for the hpi (inline) and satellite (hps) series, meaning: