CGB Low Profile Press Series

CGB Low Profile Press Series

CGB Low Profile Press

The CGB is a compact, high-performance press. Available in 2 to 30 tons, this bench-top design offers outstanding force and performance in a footprint just a few inches wide.

The upper bolster incorporates a high precision rail system for precise motion and rigidity. The removable machined tooling base comes with four tapped holes ready for user's tooling. All HyperCyl cylinder versions are available on the CGB. All the benefits of hydra-pneumatic-cleanliness, medium to high forces, reduced contact shock, energy efficiency, low noise, and environmentally friendly-enhance the value of the CGB press. Riveting, clinching, piercing, joining, marking, and coining are just a few applications suited for this press solution. Numerous controls options and modifications are possible upon request. Made in the USA.

FRAME OPTIONS

  • T-Slots
  • Center Through Hole
  • Daylight Opening and Plate Dimensions

CONTROL OPTIONS

PLC1 Pass/Fail Control Package

The PLC1 press control package is the most versatile control system for all HyperCyl presses. Easily upgradeable with various options, the PLC1 control package permits an unlimited amount of press functionality and program changes to accommodate different applications.

  • PLC Controller with 24 VDC Power Supply
  • Control Redundancey Relay
  • Optical Opto-Touch Two Handed Non-Tiedown-Anti-Repeat Press Initiate
  • E-Stop, Power On/Off Push Buttons
  • Auto Run/Jog Push Buttons
  • User Adjustable Pressure Achieved Ram Retract Control
  • Compete Pneumatic Controls with Main Air Filter, Regulator, Lubricator and Lock-Out/Tag-Out Valve
  • Ram Speed Flow Control

PLC1 Options

EC1 Control Package

The EC1 press control package provides basic, dedicated electric press control for all HyperCyl press systems. All control logic operator push buttons are contained within the two-hand control enclosure.

  • Self-contained, Dedicated Logic Control with 110VAC Power Cord
  • Photo-Optic Sensors for Press Initiate (insert finger(s) within .3 sec). Non-Tie Down, Anti-Repeat
  • **User Adjustable PRESSURE ACHIEVED Ram Retract Control**
  • Complete Pneumatic Controls with Main Air Filter, Regulator, Lubricator and Lock-Out/Tag-Out Valve
  • Part Contact (tooling closed) Power Stroke Sequence Sensor
  • Ram Speed Flow Control

PN1 Control Package

The PN1 press control package provides basic, dedicated pneumatic press control for HyperCyl press systems. All control logic and operator push buttons are contained within the two-hand control enclosure.

  • Self-contained, Dedicated Logic Control
  • Light Actuation, Recessed Push Buttons for Press Initiate (insert finger(s) within .3 sec).
  • Non-Tie Down, Anti-Repeat
  • **User Adjustable TIME ACHIEVED Ram Retract Control**
  • Complete Pneumatic Controls with Main Air Filter, Regulator, Lubricator and Lock-Out/Tag-Out Valve
  • Part Contact (tooling closed) Power Stroke Sequence Sensor
  • Ram Speed Flow Control

Remote Operation Station

Where assembly processes, part size or operator safety and ergonomics do not permit the operator control to be located on the press, the remote operator station option places the operator two-hand control and E-Stop function controls on a remote stand. The stand can be positioned anywhere within 6 ft. of the press and is height adjustable from 30.00" to 40.00" All control lines are protected by heavy nylon sleeve, strain relieved. Connection by single plug-in to back of main control panel.

  • Multiple station operation - two operators required for press actuation
  • Ergonomically designed
  • Height adjustable, easily positioned for various applications