Hypercyl drive units are a low cost solution to ALL your high force needs.
"SPEED, PRECISION, POWER"
The HPI, HPS and HPT HyperCyl® cylinders require two (2) pneumatic 4-way directional control valves and a plant air supply for proper operation. The HZ series HyperCyl® cylinder requires only one (1) pneumatic 2-way directional control valve.
Figure 1. Cylinder Retracted
In this view air is directed to ports B1 and B2, fully retracting the reservoir, working, and high pressure pistons.
Figure 2. Approach Stroke
Regulated air is directed to port A1. The reservoir piston advances, displacing the reservoir oil through the valve block (yellow area) to the back of the working piston, advancing the cylinder rod (at low force) until meeting resistance (work surface).
Figure 3. Power Stroke
Regulated air pressure is applied to port A2. High pressure piston and rod advance until contacting the valve block seal, isolating the reservoir oil from the oil contained in the working section. Continued movement intensifies and displaces the trapped oil, developing power stroke. Step 1 returns all three pistons and oil to the retracted position.